Install the battery on the remote control and check the function by pressing the buttons - a red light indicates it’s working.
Connect the UV bulbs into the light cage.
Connect the UV bulbs into the light cage. Put a little pressure against the base. You’ll hear a “click” once properly connected.
Plug-in device. You will hear a short beep once plugged.
To turn the product ON, press one of the timer options: 15min, 30min, or 60min. A beep sequence will start until the lights turn on. This is a signal that you must leave the room.
Once sanitation time is complete, the light turns off and the beeping sound keeps active until you turn the lamp off. It won’t turn back ON automatically.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article